Products

VM™ GMD

Air Gap monitoring (Rotor/Stator)

The VM™GMD sensor is designed with a thin body and a wide measuring range that allows monitoring of small and large air gaps. VMGMD air gap sensors are easy to install without removing the rotor or poles. These sensors are resistant to chemicals and solvents commonly used during installation. During operation, they are immune from strong magnetic fields, carbon dust, and deposits of oil. Each VMGMD air gap measuring chain is composed of a passive, non-contact capacitive sensor that measures the distance between its surface and a metallic target. The raw signal picked up by the sensor is sent to a conditioner through a triaxial extension cable to be converted into a linearized 4 to 20 mA signal. Different measuring ranges are available to adapt to different machine air gaps

Datasheet    VM3 Airflow: 2-20 mm >      VMGMDAF >

MFP™-100

Magnetic flux sensor

The MFM magnetic flux measuring system monitors magnetic field density and detects imbalances that contribute to machine vibration, overheating and excessive stress on the rotor and stator. The sensor can be installed without removing the rotor or the poles.

Datasheet    MFM-100 >

FOA™-100

Fiber optic accelerometer for end-winding vibration monitoring

The FOA fiber optic accelerometer was designed to measure vibration amplitudes of high voltage components that are exposed to electrodynamic and mechanical stress, such as stator end-windings. Its robust design, made of non-metallic and electrically non-conducting materials, makes it suitable for hostile environments. No field calibration is required.

Hojas de datos    FOA-100-20 >

VSM797S™

Piezoelectric accelerometer

Absolute vibration

The VSM797S is a piezoelectric accelerometer used to measure absolute vibrations in various applications, including the stator frame and core in harsh industrial environments like mining. This sensor was developed to ensure accurate results throughout the entire operating temperature range.

Datasheet    VSM797S >

FOT™-200

Fiber optic temperature sensor

The FOT fiber optic temperature sensor is used to monitor knife switches temperature. Its robust design makes it suitable for explosive and high voltage environments.

Datasheet    FOT-200 >

TWR™ ThermaWatch rotor

Rotor pole temperature

The TWR ThermaWatch rotor sensor is a fast-response, non-contact sensor that measures rotor pole-end temperature. Specially designed for the mining industry, this high speed temperature sensor allows for a comprehensive analysis of the condition of the rotor.

Datasheet    TWR-200 >

TWS™ ThermaWatch 

Stator temperature

The TWS ThermaWatch stator sensor is a real-time multipoint temperature sensor. It provides valuable information about the thermal behavior of a stator core, especially the hot spots or shorted laminations.

Datasheet    TWS-200 >

ZPU™-5000

Protection, monitoring & analysis unit

The ZPU-5000 is a multi-channel acquisition instrument designed for monitoring and protecting large rotating machines. Available in a network (with a ZOOM server), the ZPU-5000 can simultaneously monitor multiple parameters and communicate with the ZOOM software.

Datasheet    ZPU-5000 >

ZOOM monitoring cabinet

19" rackmount freestanding cabinet (45 U)

Combine all your quality control data acquisition units in one single space, and simultaneously monitor all the critical parameters on your machines.

Datasheet    ZOOM monitoring cabinet 45U >